- Home
- Products
- Machining Accessories & Auxiliaries
- TAIWAN FIMITECH CORP.
- BECHEM Metalworking Oils Series Oil-based Metalworking Oils
TAIWAN FIMITECH CORP.
BECHEM Metalworking Oils Series Oil-based Metalworking Oils
Share:
Oily metalworking fluids
| name | illustrate | viscosity (mm²/s) |
Flashpoint (°C) |
|---|---|---|---|
| Berucut SCO 446 ECO | This is a high-performance, biodegradable, high-viscosity 41cst vegetable-based cutting oil. | 41 | ≥ 270 |
| Berucut SFO 205 | Mainly used for finishing, grinding, turning, and milling; chlorine-free, with excellent cleaning properties, preventing grinding wheel clogging and ensuring precise tolerances. | 5-6 | ≥ 120 |
| Berucut SFO 7HC | Good cooling and rinsing of grinding wheels, high contamination load capacity, low volatility, high flash point of 160°C, suitable for cutting and grinding steel, cast iron and carbide (tungsten carbide) hard alloys. | 7 | 160 |
| Berucut SCO 310 | Suitable for machining steel, high-strength and tempered steel, with excellent cleaning power, preventing the formation of cutting edge and mechanical rust on tools. Suitable for deep hole drilling, gear grinding, and stamping thread forming. Not suitable for non-ferrous metals. SCO310V is an all-plant-based cutting oil and is biodegradable. | 10.5-13.5 | ≥ 148 |
| Berucut TBO 315 | This high-performance cutting oil achieves high surface finishes, significantly improves cutting speeds, ensures minimum dimensional tolerances, and prevents the formation of new cutting edges, guide rod wear, and tool mechanical corrosion, even in difficult cutting operations, deep hole drilling, and BTA (Browser Abrasive). TBO422 is designed for large-diameter deep hole machining. | 16 | 170 |
| Berucut SCO 122 | Free of chlorine and organic sulfur, preventing mechanical rusting of workpieces; residual oil film does not adhere or resinify; suitable for steel, cast iron, and special aluminum alloy machining; ensures extended tool life. Yida DIN5154-2, for use in hydraulic oils and gear oils. | twenty two | ≥ 200 |
| Berucut SCO 322 HC | It is mainly used for high-strength hardened or heat-treated steel. The new formula has high resistance to volatility and oil mist, can achieve high cutting speeds, prevents the formation of new cutting edges, and extends tool life. | 17.5-21.5 | ≥ 210 |
| Staroil CGLP 32 MF | Anti-oil mist cutting oil is suitable for cutting steel, as well as for turning, drilling, or milling of light and non-ferrous metals. | 32 | >170 |
| Berucut 130/15 | This is a new type of cutting oil specifically designed for the medical field, suitable for products made of titanium and stainless steel. It features an extreme pressure-resistant lubricating film, making it suitable for demanding machining applications. | 15 | 190 |
| Beruclean 4029 | This colorless, odorless, low-viscosity electrical discharge machining (EDM) oil has a low boiling point, very low evaporation rate, excellent cleaning and cooling properties, and good filterability. Combined with its high discharge capability, it is suitable for highly sensitive processes, such as the production of micropores. Beruclean 4027 meets high flash point requirements. | 1.4 | >75 |
| Beruclean MQL-A20 | This spray-type cutting oil is especially suitable for cutting, turning, milling, drilling, grinding, punching, bending, and rolling of low alloy steel, sensitive aluminum alloys, and stainless steel. It can achieve high surface quality, extend tool life, and leave very little surface residue. It can be applied by spraying or dripping. | 24.7-29.7 | ≥ 180 |
| Beruclean MQL-E30 | Spray-type cutting oils can be applied to oily machining processes through spraying, wiping, and dripping, without the need for dilution. After evaporation, they leave virtually no residue on the surface of machine parts. | 30 | 280 |
Oil for mechanical equipment
| name | illustrate | viscosity (mm²/s) |
Flashpoint (°C) |
|---|---|---|---|
| Staroil CGLP 32 MF | This high-wear-resistant rail oil prevents sticking and dripping, exceeds FXG 12 level testing, is compatible with cutting energy, and is designed for use in rails, gears, bearings, spindles, textiles, papermaking, and other industries. | 32(32MF) | >170(32MF) |
| Staroil CGLP 68 MF | 68(68MF) | ||
| Staroil CGLP 220 MF | 220(220MF) | >200 |
Rust-preventive oil
| name | illustrate | viscosity (mm²/s) |
Flashpoint (°C) |
indoor Rust prevention period (months) |
outdoor Rust prevention period (months) |
|---|---|---|---|---|---|
| Beruprotect DW 12 V | Synthetic rust-preventive oil, fragrance-free, water-displacement for quick drying. Beruprotect 25 S provides medium- to long-term rust protection. |
2.8 | ≥ 56 | 9-12 | 3-6 |
| Beruprotect 25S | It contains no heavy metals or aromatics, has excellent creep resistance, can form a high-efficiency protective layer, and can be dried quickly. | 3.3 | ≥ 56 | 9-12 | 3-6 |
| Beruprotect 30 W | This high-tech synthetic rust-preventive oil is a water-displacement type, suitable for long-term storage and transportation, and is ideal for export packaging. | 8.5 | ≥ 56 | 12-15 | 6-8 |
| Beruprotect WM 190 M | Concentrated emulsified rust-preventive oil can be heated and dried quickly at a concentration of 2-30% before use. | 125 | ≥ 56 | 12-15 | 6-8 |
Cold forming coating lubricant
| name | illustrate | Applicable materials (mm²/s) |
Applicable temperature (°C) |
|---|---|---|---|
| Beruforge 120 D | General cold forging process | Water-based/steel and non-ferrous metals | 90°C-95°C |
| Beruforge KFP 22 | Specifically designed for the production of difficult-to-produce hollow and extruded parts, used in the machining of cups and the warm forging of chromium-nickel bolts. Free of chlorine and heavy metals. | Not applicable to non-ferrous metals | - |
Hot (warm) forging oil
| name | illustrate | Applicable materials | Applicable temperature |
|---|---|---|---|
| Beruforge 2002B | Suitable for grinding and forging tool steels at temperatures up to 300°C due to their special composition and good lubrication properties. | Water-based/steel and non-ferrous metals | 140°C~300°C |
| Beruforge 906 HP | Suitable for use in spray atomization systems. The film dries quickly and can be used at concentrations of 1:1 to 1:10, depending on the ratio. | Not applicable to non-ferrous metals | 120°C~350°C |
| Beruforge 120AL | It is a synthetic water-based compound that does not contain graphite abrasion removers and can be used for spray coating applications. | Water-based/steel and non-ferrous metals | 100°C~320°C |
| Beruforge 200CU | This circulating release lubricant is specifically developed for high-performance forging equipment. It prevents corrosion of non-ferrous metals. Use 2-16% in the working fluid. | Water-based/steel and non-ferrous metals | 120°C~350°C |
| Berulit 740.88 | It exhibits high viscosity and provides stable dispersion of graphite in mineral oil-based lubricants. Suitable for hot extrusion and semi-hot forging. Applications include brush coating or airless spray systems, and 3D forged aluminum products. | Oily/Steel and Non-ferrous Metals | 300°C |
Stamping and stretching forming oil
| name | illustrate | Applicable materials | viscosity (mm²/s) |
|---|---|---|---|
| Beruform VSM 164 | Oily, highly volatile product; suitable for high extreme pressure applications; produces no burrs or stickiness during processing; ideal for progressive die machining. Suitable for materials with a thickness of approximately <2mm. | Suitable for ferrous metals, copper, aluminum, and stainless steel. | 5.4-6.6 @40°C |
| Beruform STO 3446 | Oil-based, containing mineral oil, chlorine-free. Suitable for non-cutting forming processes such as aluminum foil sheets with a thickness of approximately 6-8mm. Can be applied by rolling, brushing, or dripping. Processing speed can reach approximately 40 strokes per minute. | Zinc-plated and stainless steel | 1000~1024 @20°C |
| Beruform STP 50 CA | This is an oil-based, odorless, chlorine-free, high-performance stretching paste, capable of deep stretching to a thickness of 8mm. Stretching speeds reach 180m/min, reducing surface area by 15-25%. The diameter of the stretched wire is typically between 2 and 30mm. | Automotive sheet metal and body parts | ≥180 |
| Beruform STP 3734 | Washable, mineral oil-free, chlorine- and phosphorus-free stretching paste. For stretching and forming of raw materials and steel. Manufacturing of aluminum bronze alloy bars and profiles 20-80mm, with a maximum single-pass deformation of 25%. | Non-ferrous metals, copper alloys and steel | 1620~1980 @40°C |
| Beruform STE 5023 | Water-soluble, chlorine-free, nitrite-free, and free of amines, suitable for stamping and deep drawing of non-ferrous metals, with a concentration ranging from 5% to 25%. Applied to heavy-duty copper forming and demanding cutting processes, such as reaming and welding torch drilling. | Stamping and deep drawing of non-ferrous metals | 1200~2000 @40°C |
| Beruform STO 3009C | This is a mineral oil-free drawing oil containing natural and synthetic esters, making it more suitable for deep drawing steel pipes, stainless steel pipes, and stainless steel wires. Due to its excellent lubricity, it allows for high drawing speeds. | Deep drawing of steel pipes, stainless steel pipes and stainless steel wires | 3300 @40°C |
Contact Us
If you have any suggestions or advice, please leave your valuable information and we will reply to you as soon as possible.