- Home
- Products
- CNC Machines
- LITZ HITECH CORPORATION
- CNC drilling and tapping machine
LITZ HITECH CORPORATION
CNC drilling and tapping machine
TX-500-700-1000
Share:
Product Specifications
| TX-500 | TX-700 | TX-1000 | ||
|---|---|---|---|---|
| Three-axis travel | ||||
| X-axis travel | mm | 500 | 700 | 1000 |
| Y-axis travel | mm | 400 | 400 | 500 |
| Z-axis travel | mm | 330 | 330 | 350 |
| From the spindle nose to the worktable surface | mm | 170 - 500 | 170 - 500 | 150 - 500 |
| spindle | ||||
| Spindle speed | rpm | 12000 | 12000 | 12000 |
| Automatic tool changer system | ||||
| Number of cutting tools | Only | twenty one | twenty one | twenty one |
| Maximum usable tool diameter (without adjacent tools) | mm | 60 / 80 | 60 / 80 | 60 / 80 |
| Maximum tool length | mm | 250 | 250 | 250 |
| Maximum tool weight | kg | 3 | 3 | 3 |
| Tool exchange method | disc | disc | disc | |
| Tool specifications | BT-30 | BT-30 | BT-30 | |
| motor | ||||
| Spindle motor (continuous/30-minute stop) | kw ( HP ) | 3.5 / 5.5 | 3.5 / 5.5 | 3.5 / 5.5 |
| X/Y/Z axis motors | kw | 1.5 / 1.5 / 2.2 | 1.5 / 1.5 / 2.2 | 1.5 / 1.5 / 2.2 |
| workbench | ||||
| working area | mm | 650 x 400 | 850 x 400 | 1100 x 500 |
| Maximum load of the workbench | kg | 250 | 250 | 350 |
| T-slot (slot x width x center distance) | mm | 3 x 14 x 125 | 3 x 14 x 125 | 3 x 14 x 125 |
| Rapid displacement | ||||
| rapid X-axis displacement | M/min | 48 | 48 | 48 |
| Y-axis rapid displacement | M/min | 48 | 48 | 48 |
| Z-axis rapid displacement | M/min | 48 | 48 | 48 |
| Cutting feed rate | mm/min | 1 - 20000 | 1 - 20000 | 1 - 30000 |
| controller | ||||
| Mitsubishi | M80 | M80 | M80 | |
| Other projects | ||||
| Machine weight | kg | 3000 | 3500 | 4100 |
| Power demand | KVA | 15 | 15 | 15 |
| Water tank capacity | L | 200 | 200 | 300 |
| air compressor source | kg/cm2 | 6 | 6 | 6 |
Equipment List
●Standard Equipment ○Optional Equipment ✩Please inquire| spindle ● Spindle speed 12000RPM ○ Spindle speed 24000 RPM ○ Spindle oil cooler ○ Spindle center water outlet system ● Spindle air blowing device ● Rigid tapping Cooling system ●Cutting fluid cooling system ●Programmable air blowing system for the spindle Chip removal system ● Cutting fluid system ○ Top cover ○ Side chip removal device ○ Fixture rinsing device ●Machine cleaning water gun ● Machine cleaning air gun ●Closed sheet metal ● Slide rail guard X / Y / Z Measurement system ○Infrared knife breakage detection ○ Workpiece Measurement System ○ Tool Length Measurement System Lubrication system ●Central lubrication system ○ Manual grease lubrication ○ Automatic grease lubrication ●Automatic lubrication Oil-water separation system ○ Disc-type oil-water separator |
ATC Tool Exchange ●ATC tool magazine stores 16T tools ●ATC tool magazine stores 21T tools ● Tool specification BT-30 ○ Tool specifications: CAT or other ●Automatic tool changer system ○ Servo Tool Magazine Electrical components ●Front door safety door device ●Work light ● Warning lights ● Electrical box heat exchange system ○ Transformer Unit ●M30 Automatic Disconnection System ○ Front LED lights controller ●Mitsubishi M80 ○Mitsubishi M830S ○FANUC 0iMD other ○DDR Built-in Fourth Axis ○ Fourth axis (rotation axis) ○ Tooling assembly ○CE Specification ○ The column height is increased by 100 mm ○ The column height was increased by 200 mm ○ Automatic door ● Foundation screw pads ● Toolbox ○ Oil mist recovery unit ✩ ○ Tailstock bracket ✩ ○ Shock-absorbing foot pads |
Contact Us
If you have any suggestions or advice, please leave your valuable information and we will reply to you as soon as possible.