- Home
- Products
- CNC Machines
- LITZ HITECH CORPORATION
- Horizontal machining center
LITZ HITECH CORPORATION
Horizontal machining center
LH-500A
Share:
Product Specifications
| journey | ||
|---|---|---|
| X / Y / Z axis travel | mm | 700 / 650 / 650 |
| From spindle center to worktable surface | mm | 50-700 |
| From the spindle nose to the center of the worktable | mm | 150 - 800 |
| workbench | ||
| workbench area | mm | 500 x 500 |
| Maximum workpiece size | mm | Ø 700 |
| Maximum load of the workbench | kg | 500 |
| Maximum height of workpiece | mm | 800 |
| Workbench surface configuration | mm | 24-M16 Pitch 100 |
| Minimum division angle of the worktable | 1° | |
| spindle | ||
| maximum spindle speed | RPM | 10000 |
| Spindle speed transformation number | RPM | 6000 |
| Maximum cutting torque of the spindle (standard) | Nm | 120 |
| spindle end hole taper | 7/24 Taper, NO.40 | |
| spindle bearing inner diameter | mm | 70 |
| spindle drive method | direct connection | |
| Give in | ||
| Three-axis rapid displacement | mm/min | 36000 |
| Cutting feed | mm/min | 1-10000 |
| Manual feed | mm/min | 1260 |
| Automatic tool changer | ||
| Handle type | ISO 40 or BBT-40 | |
| Tool storage capacity | Only | 60 |
| Maximum tool diameter (nearest tool diameter) | mm | 80 (160) |
| Maximum length of cutting tool | mm | 380 |
| Maximum weight of the knife | kg | 8 |
| ATC exchange time (T to T) | Second | 5 |
| Tool selection method | Addressing | |
| Automatic workbench exchange system | ||
| Number of workstations | Only | 2 |
| Workbench exchange method | rotary | |
| Automatic worktable exchange time | Second | 18 |
| Controller System | ||
| FANUC | 0i-MF | |
| motor | ||
| spindle motor power | KW | 15 / 18.5 |
| spindle motor torque | Nm | 120 |
| X / Y / Z axis motor power | KW | 7 / 7 / 4 / 1.6 |
| Hydraulic system motor | KW | 2.2 |
| Cutting system motor | KW | 1.6 |
| Power supply | ||
| Electricity demand | KVA | 42 |
| Oil/water tank capacity | ||
| Hydraulic system capacity | L | 60 |
| Lubrication system capacity | L | 4 |
| Cutting system capacity | L | 760 |
| Mechanical dimensions | ||
| Mechanical height | mm | 2980 |
| Area | mm | 5000 x 3200 |
| Mechanical weight | kg | 15000 |
Equipment List
●Standard Equipment ○Optional Equipment ✩Please inquire| spindle ● Spindle speed 10000 RPM ● Spindle oil cooler ● Main spindle air curtain system ●Direct drive of main spindle Cooling system ●Circular spray of cutting fluid ○ Spindle external air blowing system ○ Spindle center water outlet system Chip removal system ● Scraper-type chip conveyor ●Drop Collection Vehicle ●In-machine spiral chip conveyor ●In-machine oil-water separation system ●Top chip removal system ● Disc-type oil-water separator Measurement system ○ Tool Length Measurement System NC-4S ○RMP-60 Work Measurement System ○ Tool breakage detection (tool magazine) ✩ Workbench Unit ● Workbench 1 ˚ Divided ○ Workbench 0.001 ˚ Division ● M16 mounting holes on the worktable ○ Workbench T-slot security system ●Front door/side door safety switch ○CE Safety Standards Oil-water separation system ○ Disc-type oil-water separator |
Lubrication system ●LUBE automatic lubricating grease for XYZ axes ATC system ● 60T of stored cutting tools ● Tool Specifications BBT ○ Tool Specifications (CAT) ● Tool specification NO.40 Three-axis drive system ● Three-axis roller linear guide ● Triaxial hollow cooling system ○ Triaxial optical scale ○ Fourth axis optical scale Electrical components ●M30 Automatic Disconnection System ●Work lights (lighting) ● Warning lights ○ Electrical box cooling system ● Electrical box heat exchanger controller ○FANUC 31i ●FANUC 0iMD other ○ Oil mist recovery unit ○Rotate window |
Contact Us
If you have any suggestions or advice, please leave your valuable information and we will reply to you as soon as possible.