Ultra-high efficiency vertical machining center NSV106A

• One-piece molded axial motor mount.
• The extra-large columns and base ensure that the vehicle does not shake during high-speed operation.
• Advanced FEM rigorous analysis and a completely new enhanced machine body structure design demonstrate ultra-high cutting efficiency and machining stability, meeting the stringent requirements of high-speed and high-efficiency machining.
• All three axes use 45 mm linear guides, providing an exceptionally high load capacity, with a maximum load of 700 kg.
• The X-axis adopts a six-slider design, which improves rigidity by 50% compared to the four-slider design of the old model.
• The optimal Y-axis rail span ratio. When the worktable is in its extreme position, the center of gravity of the worktable is approximately on the Y-axis rail, which can reduce the overhang of the saddle.

NEW IDD Direct-Drive Spindle Design

• The spindle and motor adopt an IDD direct-drive design, which results in low noise and smooth, high-speed operation.
• Using ceramic ball bearings, it not only has high speed but also extremely high axial and radial rigidity, which can meet the harsh tests of heavy cutting, drilling and tapping.

Diverse tool magazine options

• Tool change speed (TT): 1.8 sec.
• 24T disc-type tool magazine.
• 30T disc-type tool magazine / 48T chain-type servo tool magazine (optional).

High-efficiency chip removal

• It is equipped with a triple-spiral power chip winding device.
• Alternatively, a dual-spiral power chip winch can be selected.