- Home
- Products
- CNC Machines
- LITZ HITECH CORPORATION
- CNC lathe
LITZ HITECH CORPORATION
CNC lathe
LT-350
Share:
Product Specifications
| journey | ||
|---|---|---|
| X-axis travel | mm | 140 |
| Z-axis travel | mm | 350 |
| spindle | ||
| Spindle speed | RPM | 40-6000 |
| spindle nose | A2-5 | |
| Front bearing inner diameter | mm | 80 |
| spindle bore | mm | 56 |
| Processing capacity | ||
| Spiral diameter on the bed surface | mm | 350 |
| Reciprocating table spiral diameter | mm | 280 |
| Distance between two hearts | mm | 455 |
| Standard machining diameter | mm | 174 |
| Maximum machining diameter | mm | 240 |
| Maximum machining length | mm | 350 |
| Shaft bore diameter | mm | 45 |
| Tool stage machining capabilities | ||
| Dota type | 12-STATION | |
| External diameter tool size | mm | 20 |
| Maximum diameter of inner diameter cutter | mm | 32 |
| controller | ||
| FANUC | 0i-MATE-TD | |
| Tail Seat | ||
| Tailstock movement | mm | 290 |
| Tailstock pivot travel | mm | 100 |
| Tailstock axle tilt | MT4 | |
| Tailstock shaft diameter | mm | 75 |
| movement speed | ||
| X-axis rapid displacement speed | M/min | twenty four |
| Z-axis rapid displacement speed | M/min | 30 |
| motor | ||
| spindle motor | kw | 7.5/11 |
| X-axis servo motor | kw | 1.2 |
| Z-axis servo motor | kw | 1.8 |
| Servo Turret Motor | kw | 0.75 |
| Other projects | ||
| Total power consumption | KVA | 15 |
| Cutting fluid capacity | L | 160 |
| Machine size | ||
| Machine weight | kg | 3500 |
| Machine length | mm | 1885 |
| Machine height | mm | 1720 |
| Machine width | mm | 1600 |
Equipment List
●Standard Equipment ○Optional Equipment ✩Please inquire| Standard equipment | |
|---|---|
| Three-jaw hydraulic hollow chuck (including one set each of soft and hard jaws and T-clamps) | ● |
| Work light | ● |
| Warning lights | ● |
| Toolbox | ● |
| Instruction Manual | ● |
| Programmable hydraulic tailpipe | ● |
| Programmable hydraulic chuck | ● |
| Clamp foot switch | ● |
| Iron chip conveyor + chip collector | ● |
| Bored tool holder | ● 6 |
| End face tool holder | ● 2 |
| Outer diameter knife holder | ● 12 |
| Boring tool sleeve | ● Ø6, Ø8, Ø10, Ø12, Ø16, Ø20, Ø25 (2 of each) |
| Drill bit sleeve | ● MT1, MT2, MT3 |
| Deep hole drill sleeve | ● Ø20, Ø25 |
| Selected equipment | |
| Workpiece catcher | ○ |
| Bar feeder and installation interface | ○ |
| Workpiece counter | ○ |
| Automatic safety door control system | ○ |
| robotic arm interface | ○ |
| Tool Detector | ○ |
| Flexible collet chuck (including flexible collets) | ○ |
Contact Us
If you have any suggestions or advice, please leave your valuable information and we will reply to you as soon as possible.