- Home
- Products
- CNC Machines
- ASCENDER MACHINERY INC.
- GC-2000S2 Deep Hole Machining Machine
ASCENDER MACHINERY INC.
GC-2000S2 Deep Hole Machining Machine
Share:
Product Introduction
- Gun Drill Series: GC-1500S2
- High-efficiency single-axis, dual-axis, and multi-axis gun drilling deep hole machining machines
- Suitable for center hole machining applications
- Suitable for machining mold parts, vehicle parts, hydraulic components, and various round bar workpieces.
- We can also customize machine specifications according to the customer's workpiece requirements and processing conditions.
Model Introduction
Machine Features
- The entire machine can be equipped with either a rigid rail or a linear rail to improve the stability of large-diameter machining; the worktable has a full support design, which ensures high stability and can withstand heavy loads, thus ensuring the accuracy after machining.
- Equipped with an 8000RPM spindle (motor not at full power output) and a high-efficiency high-pressure pump, the machine efficiency is increased by more than 30% in drilling small holes of Ø3-5MM.
- The cutting fluid motor and pump are specially designed to address the different chip removal characteristics of small and large orifices, with two separate high-pressure and low-pressure systems to achieve optimal cutting efficiency.
- The extra-large oil tank design, coupled with a high-capacity fully immersed oil temperature cooler, accelerates oil temperature cooling, improves processing efficiency, and extends tool life.
Main configuration:
- Electrical box air conditioner refrigeration unit
- Drum paper belt filter
- Immersion cutting fluid cooler
- High and low pressure cutting oil motor
- Mitsubishi Absolute Control System
Select configuration:
- Custom spindles and single/double spindles
- outer cover protects sheet metal
- Half-coverage protective sheet metal
- FANCU Absolute Control System
Product Specifications
| Type | GC-2000S |
|---|---|
| Machining Diameter | Ø3~30 mm (opt. Ø4~40 mm) |
| Processing depth | 2,000 mm |
| Z-axis travel | 2,800 mm |
| controller | Mitsubishi/FANUC |
| Spindle speed | 10~8,000 rpm |
| spindle motor | 7.5 KW |
| Z-axis motor | 2.0 KW |
| Cutting oil cooler | 7,500 ~ 9,000 kcl/hr |
| Drum paper belt filter | 200 l/min |
video
Contact Us
If you have any suggestions or advice, please leave your valuable information and we will reply to you as soon as possible.