- Home
- Products
- CNC Machines
- ASCENDER MACHINERY INC.
- TG-600 Deep Hole Machining Machine
ASCENDER MACHINERY INC.
TG-600 Deep Hole Machining Machine
Share:
Product Information
- Gun Drill Series - TG-600
- High-efficiency three-axis positioning gun drilling deep hole machining machine
- Suitable for applications involving the machining of eccentric holes.
- Suitable for molds, flat plates, and block-shaped workpieces
- We can customize machine specifications according to the customer's workpiece requirements and processing conditions.
Model Introduction
Machine Features
- The entire machine can be equipped with either a rigid rail or a linear rail to improve the stability of large-diameter machining; the worktable has a full support design, which ensures high stability and can withstand heavy loads, thus ensuring the accuracy after machining.
- Equipped with an 8000RPM spindle (motor not at full power output) and a high-efficiency high-pressure pump, the machine efficiency is increased by more than 30% in drilling small holes of Ø3-5MM.
- The cutting fluid motor and pump are specially designed to address the different chip removal characteristics of small and large orifices, with two separate high-pressure and low-pressure systems to achieve optimal cutting efficiency.
- The extra-large oil tank design, coupled with a high-capacity fully immersed oil temperature cooler, accelerates oil temperature cooling, improves processing efficiency, and extends tool life.
Main configuration:
- Electrical box air conditioner refrigeration unit
- Drum paper belt filter
- Immersion cutting fluid cooler
- High and low pressure cutting oil motor
- Mitsubishi Absolute Control System
Select configuration:
- Milling head (used with milling cutters for machining or tapping)
- outer cover protects sheet metal
- Half-coverage protective sheet metal
- FANCU Absolute Control System
Product Specifications
| Type | TG-600 |
|---|---|
| Machining Diameter | Ø3~25 mm |
| Processing depth | 600 mm |
| workbench area | 600 x 900 mm |
| Workbench load capacity | 500 kgs |
| T-shaped groove | 18 x 5 x 110 mm |
| X-axis travel | 600 mm |
| Y-axis travel | 350 mm |
| Z-axis travel | 1,150 mm |
| controller | Mitsubishi/FANUC |
| Spindle speed | 8,000 rpm |
| spindle motor | 5.5 KW |
| X / Y / Z axis motors | 2.0 / 3.0 / 1.5 KW |
| Rapid feed | X, Y axis 6,000 mm/min, Z axis 10,000 mm/min |
| Cutting oil tank capacity | 1000 L |
| High-pressure cutting fluid motor | 10 HP |
| Cutting oil cooler | 7,500 ~ 9,000 kcl/hr |
| Drum paper belt filter | 200 L/min |
| Mechanical weight | 7,850 kgs |
| Floor area (length x width x height) | 4,000 x 3,650 x 2,665 mm |
video
Contact Us
If you have any suggestions or advice, please leave your valuable information and we will reply to you as soon as possible.