- Home
- Products
- CNC Machines
- LITZ HITECH CORPORATION
- Milling and turning machining center
LITZ HITECH CORPORATION
Milling and turning machining center
TM-2500STM
Share:
Product Specifications
| Capacity, capacity | ||
|---|---|---|
| Maximum helix diameter (tool spindle/lower turret) | mm | ø530/ø450 |
| Maximum machining diameter (tool spindle/lower turret) | mm | ø450/ø250 |
| Maximum machining length | mm | 1040 |
| Through-hole diameter of bar | mm | ø52 |
| journey | ||
| X-axis travel distance | mm | 560 |
| Y-axis travel distance | mm | ±125 |
| Z-axis travel distance | mm | 1080+72 |
| X2 axis travel | mm | 165 |
| Z2 axis travel distance | mm | 1040 |
| W-axis travel | mm | 1080 |
| B-axis rotation angle | Spend | -20°~200° |
| C-axis rotation angle | Spend | 360° |
| feed rate | ||
| X-axis rapid displacement | M/min | 36 |
| Y-axis rapid displacement | M/min | 36 |
| Z-axis rapid displacement | M/min | 36 |
| X2 axis rapid displacement | M/min | 20 |
| Z2 axis rapid displacement | M/min | 30 |
| W-axis rapid displacement | M/min | 30 |
| B-axis maximum speed | rpm | 25 |
| C-axis maximum speed | rpm | 250 |
| Turning spindle | ||
| S1 clamp type | 8" | |
| S1 Clip-on Nose Tip Type | A2-6 | |
| S1 aperture | mm | ø61 |
| S1 spindle maximum speed | rpm | 4500 |
| S1 motor output power | kw | 11/15 |
| S2 clamp type | 8" | |
| S2 Clip-on Nose Tip Type | A2-6 | |
| S2 aperture | mm | ø61 |
| S2 spindle maximum speed | rpm | 4500 |
| S2 motor output power | kw | 11/15 |
| Milling spindle | ||
| maximum spindle speed | rpm | 12000 |
| Motor output power | kw | 11/22 |
| B-axis minimum division angle | Spend | 0.001° |
| Tool exchange | ||
| Tool indexing angle/position | 90°/4 | |
| Cutting tool type | HSK-63T | |
| Tool magazine capacity | Only | 40 |
| Maximum tool diameter (without adjacent tools) | mm | ø90(120) |
| Maximum blade length | mm | 250 |
| Maximum blade weight | kg | 8 |
| Dota | ||
| Cutterhead type | 12 sides | |
| Tool holder type | BMT45 | |
| External diameter tool size | □20 | |
| Internal diameter cutter dimensions | ø32 | |
| Power cutter speed | rpm | 5000 |
| Power blade horsepower | kw | 2.8 |
| controller | ||
| System Model | SIEMENS 840D | |
| Machine size | ||
| Machine height | mm | 2960 |
| Floor space (excluding chip conveyor) | mm | 4085x2916 |
| Machine weight | kg | 15000 |
| Energy requirements | ||
| Power capacity | KVA | 42 |
| wind pressure demand | kg/cm³ | 6 |
Equipment List
●Standard Equipment ○Optional Equipment ✩Please inquire| spindle ● The first turning spindle has a maximum speed of 4500 RPM. ● Maximum spindle speed of the second turning machine: 4500 RPM ● Maximum milling spindle speed: 12000 RPM ● Maximum milling spindle speed 20000 RPM ●Clamp head 8" -Clamp 10" ○ Sleeve chuck NC tailstock (TM-2500) -Ejector pin tailstock (W axis) - Rotating pin -Fixed ejector pin - Tail seat pull-back system ○Automatic installation of spindle ejector pins✩ High-precision correspondence ○X/Y/Z axis optical scale ●X/Y/Z axis guide rod hollow cooling ●B-axis optical scale ●C-axis encoder ● Spindle cooling system Measurement system ○ Tool Spindle Turner/Milling Cutter Measurement System (Polon) ○Workpiece Measurement System✩ ○ Milling/Turning Axis (B/C) Centering System ✩ ○ Lower Turret Car/Milling Tool Measurement System (Bolong) ✩ Environmental Response ○ Oil mist recovery unit Cutting fluid corresponding ● High-pressure coolant system (30 Bar) ○ High-pressure coolant system (70 Bar) ●Cutting fluid level gauge ○ Cutting fluid level gauge + thermometer Central frame ○Center frame✩ |
Controller System ○FANUC 31i-B (Five-axis, four-linkage) ○FANUC 31i-B5 (5-axis, 5-linkage) ●Siemens 840D (5-axis, 5-linkage)✩ Cutting process ● Tracked chip conveyor ✩ ● Chip collector (fixed axle) ● Chip collector (rotary shaft) ● Chip filtration system Automation ○ Automatic bar feeder -Workpiece catcher system ○ Automatic front door Tool magazine storage system - Tool storage capacity 36T (TM-2500/2500S) ● Tool storage capacity 40T (TM-2500STM) - Tool storage capacity 72T (TM-2500/2500S) ○ Tool storage capacity 80T (TM-2500STM) Tool specifications ●HSK 63T ○CAPTO C6 Dot Tower System (TM-2500STM) ●Enameled knife holder ●End face knife holder ●Outer diameter knife holder ●Axial power tool holder ●Radial power tool holder ● Boring cutter sleeve Processing function ○ Gear hobbing function Safety measures ○CE Standard ○2-way foot switch ○ Voltage regulator ○ Transformer |
Contact Us
If you have any suggestions or advice, please leave your valuable information and we will reply to you as soon as possible.