繁體中文 English
AGMACHINE TECHNO CO., LTD.

Gantry Vertical Machining Center BDO-3223

BDO-2217-8228 BRIDGE TYPE DOUBLE COLUMN MACHINING CENTER (PULLEY DRIVEN/GEAR DRIVEN)

Mechanical properties

BDO series
Gantry vertical machining center
1. X/Y/Z 1,020/560/510mm
  • Hydraulic counterweight
    The symmetrical hydraulic cylinder counterweight design on both sides of the spindle head reduces thermal deformation of the Z-axis and extends motor life.
  • Double spiral iron scrap conveyor
    The base has chip removal channels on both sides, and the chip removal grooves are integrally formed with the base to prevent cutting fluid leakage and ensure high chip removal efficiency.
1. X/Y/Z 1,020/560/510mm
  • beam
    The crossbeam structure adopts a box-type stepped design, and the span between the saddle and the crossbeam is increased to improve the bending moment brought by the spindle head and reduce the deformation of the crossbeam.
1. X/Y/Z 1,020/560/510mm
  • Tool magazine
    The tool magazine is equipped with a water tray to recover residual cutting fluid and chips from the tool holder; the enclosed space design ensures high operator safety.
1. X/Y/Z 1,020/560/510mm
  • spindle
    The high-rigidity structural design, through finite element analysis, achieves optimal structural rigidity and vibration resistance, and ensures stable machining.
    The integral high-precision spindle uses ball bearing span support, which has excellent ability to withstand machining vibration.
    Floating hydraulic knife loosening design.
1. X/Y/Z 1,020/560/510mm
  • Integrated lead screw seat
    The Y-axis lead screw bearing housing adopts an integrated design, providing optimal rigidity.
1. X/Y/Z 1,020/560/510mm
  • Control box
    The rotatable control box allows for angle adjustment depending on the working conditions.

Mechanical Specifications

ITEM / Model BDO-2217 BDO-2223 BDO-3217
journey
X-axis (worktable) 2,200mm (86.6") 2,200mm (86.6") 3,200mm (125.9")
2 linear guides
3*2 Sliding Blocks		 2 linear guides
3*2 Sliding Blocks		 2 linear guides
4*2 Sliding Blocks
Y-axis (saddle) 1,600mm(63") 2,100mm (82.7") 1,600mm(63")
2 linear guides
2*2 Sliding Block		 2 linear guides
2*2 Sliding Block		 2 linear guides
2*2 Sliding Blocks
Z-axis (spindle head) 1,000mm (39.4")/
(opt800mm(31.5"))		 1,000mm (39.4")/
(opt800mm(31.5"))		 1,000mm (39.4")/
(opt800mm(31.5"))
2 Box Guide Ways 2 Box Guide Ways 2 Box Guide Ways
From the spindle nose to the worktable surface 210-1,200mm (8.3"-47.2")/
(opt 210-1,000mm(8.3"-39.4"))		 210-1,200mm (8.3"-47.2")/
(opt 210-1,000mm(8.3"-39.4"))		 210-1,200mm (8.3"-47.2")/
(opt 210-1,000mm(8.3"-39.4"))
Distance between two pillars 1760mm (69.3") 2360mm (92.9") 1760mm (69.3")
workbench
Workbench size 2000mm*1500mm
(78.7"*59.1")		 2000mm*2000mm
(78.7"*78.7")		 3000*1500mm
(118.1"*59.1")
T-shaped trench 7x22mmx200mm 9x22mmx200mm 7x22mmx200mm
work surface to ground 830mm (32.7") 885mm (34.8") 830mm (32.7")
Maximum load of the workbench 6,000 kgs (13,200 lbs) 8,000 kgs (17,600 lbs) 8,000 kgs (17,600 lbs)
spindle
Spindle skew (BT/CAT) BT50/CAT50 BT50/CAT50 BT50/CAT50
Spindle speed RPM (BT50) 6,000rpm(P & G)(opt.8,000/10,000rpm)
speed
Rapid traverse speeds of each axis (X/Y/Z) 20/20/10M/Min.
(787/787/393IPM)		 20/20/10M/Min.
(787/787/393IPM)		 20/20/10M/Min.
(787/787/393IPM)
Approach feed rates for each axis (X/Y/Z) 1~8000mm/min 1~8000mm/min 1~8000mm/min
motor
BT50 spindle motor (continuous/30 minutes) 22/26kw (30/35HP) 22/26kw (30/35HP) 22/26kw (30/35HP)
AC servo motors of each axis X,Y,Z: 7KW-30NM X,Y,Z: 7KW-30NM X,Y,Z: 7KW-30NM
Cutting cooling pump 1250W 1250W 1250W
slide rail lubrication pump 60W 60W 60W
Spindle cooling device 1220W 1220W 1220W
Automatic tool changer
Tool arm type tool magazine capacity 32 TOOL / (OPT. 40 / 60 TOOL)
Maximum permissible diameter of the cutting tool (adjacent) BT50-Ø125MM
Maximum tool length 300mm (11.74")
Maximum permissible weight of the knife 20kg (44lbs)
Tool change time (T to T / C to C) 8/12 SEC.
accuracy
Positioning accuracy ±0.01 mm ±0.01 mm ±0.01 mm
Repeatability ±0.003 mm ±0.003 mm ±0.003 mm
General Information
air pressure 6 kg / cm² 6 kg / cm² 6 kg / cm²
Electricity demand 50KVA, 220V, 3 PHASE, 50/60HZ
Mechanical weight 26,000 kgs (57,200 lbs) 28,000 kgs (61,600 lbs) 28,000 kgs (61,600 lbs)
Floor area (Depth × Width × Height) 67600*5100*3900mm 67600*6960*3900mm 8530*5100*3900mm
controller Fanuc 0iMF/31iMB
*Our company is constantly conducting research and improvement work, and therefore reserves the right to change the design specifications, dimensions, and machinery at any time without prior notice.

TEM / Model BDO-3223 BDO-3228
journey
X-axis (worktable) 3,200mm (125.9") 3,200mm (125.9")
2 linear guides
5*2 Sliding Blocks		 4 linear guides
5*4 Sliding Blocks
Y-axis (saddle) 2,100mm (82.7") 2,600mm (102.4")
2 linear guides
2*2 Sliding Blocks		 2 linear guides
2*2 Sliding Blocks
Z-axis (spindle head) 1,000mm (39.4")/
(opt800mm(31.5"))		 1,000mm (39.4")/
(opt800mm(31.5"))
2 Box Guide Ways 2 Box Guide Ways
From the spindle nose to the worktable surface 210-1,200mm (8.3"-47.2")/
(opt 210-1,000mm(8.3"-39.4"))		 210-1,200mm (8.3"-47.2")/
(opt 210-1,000mm(8.3"-39.4"))
Distance between two pillars 2360mm (92.9") 2860mm (112.6")
workbench
Workbench size 3000mm*2000mm (118.1"*78.7") 3000mm*2500mm (118.1"*98.4")
T-shaped trench 9x22mmx200mm 11x22mmx200mm
work surface to ground 870mm (34.3") 890mm(35")
Maximum load of the workbench 10,000 kgs (22,000 lbs) 10,000 kgs (22,000 lbs)
spindle
Spindle skew (BT/CAT) BT50/CAT50 BT50/CAT50
Spindle speed RPM (BT50) 6,000rpm(P & G)(opt.8,000/10,000rpm)
speed
Rapid traverse speeds of each axis (X/Y/Z) 12/12/10M/Min.
(472/472/393IPM)		 12/12/10M/Min.
(472/472/393IPM)
Approach feed rates for each axis (X/Y/Z) 1~8000mm/min 1~8000mm/min
motor
BT50 spindle motor (continuous/30 minutes) 22/26kw (30/35HP) 22/26kw (30/35HP)
AC servo motors of each axis X,Y,Z: 7KW-30NM X,Y,Z: 7KW-30NM
Cutting cooling pump 1250W 1250W
slide rail lubrication pump 60W 60W
Spindle cooling device 1220W 1220W
Automatic tool changer
Tool arm type tool magazine capacity 32 TOOL / (OPT. 40 / 60 TOOL)
Maximum permissible diameter of the cutting tool (adjacent) BT50-Ø125MM
Maximum tool length 300mm (11.74")
Maximum permissible weight of the knife 20kg (44lbs)
Tool change time (T to T / C to C) 8/12 SEC.
accuracy
Positioning accuracy ±0.015 mm ±0.015 mm
Repeatability ±0.003 mm ±0.003 mm
General Information
air pressure 6 kg / cm² 6 kg / cm²
Electricity demand 50KVA, 220V, 3 PHASE, 50/60HZ
Mechanical weight 31,000 kgs (68,200 lbs) 36,500 kgs (80,300 lbs)
Floor area (Depth × Width × Height) 8530*6960*3900mm 36,500 kgs (80,300 lbs)
controller Fanuc 0iMF/31iMB
*Our company is constantly conducting research and improvement work, and therefore reserves the right to change the design specifications, dimensions, and machinery at any time without prior notice.

ITEM / Model BDO-4217 BDO-4223
journey
X-axis (worktable) 4,200mm (165.4") 4,200mm (165.4")
2 linear guides
7*2 Sliding Blocks		 2 linear guides
7*2 Sliding Blocks
Y-axis (saddle) 1,600mm(63") 2,100mm (82.7")
2 linear guides
2*2 Sliding Blocks		 2 linear guides
2*2 Sliding Blocks
Z-axis (spindle head) 1,000mm (39.4")/
(opt800mm(31.5"))		 1,000mm (39.4")/
(opt800mm(31.5"))
2 Box Guide Ways 2 Box Guide Ways
From the spindle nose to the worktable surface 210-1,200mm (8.3"-47.2")/
(opt 210-1,000mm(8.3"-39.4"))		 210-1,200mm (8.3"-47.2")/
(opt 210-1,000mm(8.3"-39.4"))
Distance between two pillars 1760mm (69.3") 2360mm (92.9")
workbench
Workbench size 4000mm*1500mm (157.5"*59.1") 4000mm*2000mm (157.5"*78.7")
T-shaped trench 7x22mmx200mm 9x22mmx200mm
work surface to ground 870mm (34.3") 870mm (34.3")
Maximum load of the workbench 10,000 kgs (22,000 lbs) 12,000 kgs (26,400 lbs)
spindle
Spindle skew (BT/CAT) BT50/CAT50 BT50/CAT50
Spindle speed RPM (BT50) 6,000rpm(P & G)(opt.8,000/10,000rpm)
speed
Rapid traverse speeds of each axis (X/Y/Z) 12/12/10M/Min.
(472/472/393IPM)		 12/12/10M/Min.
(472/472/393IPM)
Approach feed rates for each axis (X/Y/Z) 1~8000mm/min 1~8000mm/min
motor
BT50 spindle motor (continuous/30 minutes) 22/26kw (30/35HP) 22/26kw (30/35HP)
AC servo motors of each axis X,Y,Z: 7KW-30NM X,Y,Z: 7KW-30NM
Cutting cooling pump 1250W 1250W
slide rail lubrication pump 60W 60W
Spindle cooling device 1220W 1220W
Automatic tool changer
Tool arm type tool magazine capacity 32 TOOL / (OPT. 40 / 60 TOOL)
Maximum permissible diameter of the cutting tool (adjacent) BT50-Ø125MM
Maximum tool length 300mm (11.74")
Maximum permissible weight of the knife 20kg (44lbs)
Tool change time (T to T / C to C) 8/12 SEC.
accuracy
Positioning accuracy ±0.02 mm ±0.02 mm
Repeatability ±0.005 mm ±0.02 mm
General Information
air pressure 6 kg / cm² 6 kg / cm²
Electricity demand 50KVA, 220V, 3 PHASE, 50/60HZ
Mechanical weight 32,000 kgs (70,400 lbs) 35,000 kgs (77,000 lbs)
Floor area (Depth × Width × Height) 10110*5100*3900mm 10110*6960*3900mm
controller Fanuc 0iMF/31iMB
*Our company is constantly conducting research and improvement work, and therefore reserves the right to change the design specifications, dimensions, and machinery at any time without prior notice.

ITEM / Model BDO-4228 BDO-5223 BDO-5228
journey
X-axis (worktable) 4,200mm (165.4") 5,200mm (204.7") 5,200mm (204.7")
4 linear guides
7*4 Sliding Blocks		 2 linear guides
8*2 Sliding Blocks		 4 linear guides
8*4 Sliding Blocks
Y-axis (saddle) 2,600mm (102.4") 2,100mm (82.7") 2,600mm (102.4")
2 linear guides
2*2 Sliding Blocks		 2 linear guides
2*2 Sliding Blocks		 2 linear guides
2*2 Sliding Blocks
Z-axis (spindle head) 1,000mm (39.4")/
(opt800mm(31.5"))		 1,000mm (39.4")/
(opt800mm(31.5"))		 200-1,200mm (7.8"-47.2")/
(opt200-1,000mm(7.8"-39.4"))
2 Box Guide Ways 2 Box Guide Ways 2 Box Guide Ways
From the spindle nose to the worktable surface 210-1,200mm (8.3"-47.2")/
(opt 210-1,000mm(8.3"-39.4"))		 210-1,200mm (8.3"-47.2")/
(opt 210-1,000mm(8.3"-39.4"))		 210-1,200mm (8.3"-47.2")/
(opt 210-1,000mm(8.3"-39.4"))
Distance between two pillars 2860mm (112.6") 2360mm (92.9") 2860mm (112.6")
workbench
Workbench size 4000mm*2500mm (157.5"*98.4") 5000mm*2000mm (196.9"*78.7") 5000mm*2500mm (196.9"*98.4")
T-shaped trench 11x22mmx200mm 9x22mmx300mm 11x22mmx200mm
work surface to ground 890mm(35") 870mm (34.3") 890mm(35")
Maximum load of the workbench 12,000 kgs (26,400 lbs) 13,000 kgs (28,600 lbs) 14,000 kgs (30,800 lbs)
spindle
Spindle skew (BT/CAT) BT50/CAT50 BT50/CAT50 BT50/CAT50
Spindle speed RPM (BT50) 6000rpm(P)(opt.8000/10000rpm)
speed
Rapid traverse speeds of each axis (X/Y/Z) 12/12/10M/Min.
(472/472/393IPM)		 10/10/10M/Min.
(393/393/393IPM)		 10/10/10M/Min.
(393/393/393IPM)
Approach feed rates for each axis (X/Y/Z) 1~8000mm/min 1~8000mm/min 1~8000mm/min
motor
BT50 spindle motor (continuous/30 minutes) 22/26kw (30/35HP) 22/26kw (30/35HP) 22/26kw (30/35HP)
AC servo motors of each axis X,Y,Z: 7KW-30NM X,Y,Z: 7KW-30NM X,Y,Z: 7KW-30NM
Cutting cooling pump 1250W 1250W 1250W
slide rail lubrication pump 60W 60W 60W
Spindle cooling device 1220W 1220W 1220W
Automatic tool changer
Tool arm type tool magazine capacity FOR ARMLESS TYPE 32 TOOL / (OPT. 40/60 TOOL)
Maximum permissible diameter of the cutting tool (adjacent) BT50-Ø125MM
Maximum tool length 300mm (11.74")
Maximum permissible weight of the knife 20kg (44lbs)
Tool change time (T to T / C to C) 8/12 SEC.
accuracy
Positioning accuracy ±0.02 mm ±0.02 mm ±0.02 mm
Repeatability ±0.02 mm ±0.02 mm ±0.02 mm
General Information
air pressure 6 kg / cm² 6 kg / cm² 6 kg / cm²
Electricity demand 50KVA, 220V, 3 PHASE, 50/60HZ
Mechanical weight 38,500 kgs (84,700 lbs) 42,000 kgs (92,400 lbs) 45,500 kgs (106,700 lbs)
Floor area (Depth × Width × Height) 10110*7505*3900mm 12000*6960*3900mm 12000*7505*3900mm
controller Fanuc 0iMF/31iMB
*Mechanical specifications are subject to change without further notice.

ITEM / Model BDO-6223 BDO-6228
journey
X-axis (worktable) 6,200mm (244.1") 6,200mm (244.1")
2 linear guides
11*2 Sliding Blocks		 4 linear guides
11*4 SLDING BLOCKS
Y-axis (saddle) 2,100mm (82.7") 2,600mm (102.4")
2-line rail
2*2 Sliding Blocks		 2 linear guides
2*2 Sliding Blocks
Z-axis (spindle head) 2-line rail
2*2 Sliding Blocks		 1,000mm (39.4")/
(opt800mm(31.5"))
2 Box Guide Ways 2 Box Guide Ways
From the spindle nose to the worktable surface 210-1,200mm (8.3"-47.2")/
(opt 210-1,000mm(8.3"-39.4"))		 210-1,200mm (8.3"-47.2")/
(opt 210-1,000mm(8.3"-39.4"))
Distance between two pillars 2360mm (92.9") 2860mm (112.6")
workbench
Workbench size 6000mm*2000mm (236.3"*78.7") 6000mm*2500mm (236.3"*98.4")
T-shaped trench 9x22mmx200mm 11x22mmx200mm
work surface to ground 870mm (34.3") 890mm(35")
Maximum load of the workbench 16,000 kgs (35,200 lbs) 16,000 kgs (35,200 lbs)
spindle
Spindle skew (BT/CAT) BT50/CAT50 BT50/CAT50
Spindle speed RPM (BT50) 6000rpm(P)(opt.8000/10000rpm)
speed
Rapid traverse speeds of each axis (X/Y/Z) 10/10/10M/Min.
(393/393/393IPM)		 10/10/10M/Min.
(393/393/393IPM)
Approach feed rates for each axis (X/Y/Z) 1~8000mm/min 1~8000mm/min
motor
BT50 spindle motor (continuous/30 minutes) 22/26kw (30/35HP) 22/26kw (30/35HP)
AC servo motors of each axis 22/26kw (30/35HP) X,Y,Z: 7KW-30NM
Cutting cooling pump 1250W 1250W
slide rail lubrication pump 60W 60W
Spindle cooling device 1220W 1220W
Automatic tool changer
Tool arm type tool magazine capacity 32 TOOL / (OPT. 40/60 TOOL)
Maximum permissible diameter of the cutting tool (adjacent) BT50-Ø125MM
Maximum tool length 300mm (11.74")
Maximum permissible weight of the knife 20kg (44lbs)
Tool change time (T to T / C to C) 8/12 SEC.
accuracy
Positioning accuracy ±0.02 mm ±0.02 mm
Repeatability ±0.02 mm ±0.02 mm
General Information
air pressure 6 kg / cm² 6 kg / cm²
Electricity demand 50KVA, 220V, 3 PHASE, 50/60HZ
Mechanical weight 46,000 kgs (101,200 lbs) 49,500 kgs (108,900 lbs)
Floor area (Depth × Width × Height) 15300*6960*3900mm 15300*7505*3900mm
controller Fanuc 0iMF/31iMB
*Our company is constantly conducting research and improvement work, and therefore reserves the right to change the design specifications, dimensions, and machinery at any time without prior notice.

ITEM / Model BDO-8223 BDO-8228
journey
X-axis (worktable) 8,200mm (322.8") 8,200mm (322.8")
2 linear guides
12*2 Sliding Blocks		 4 linear guides
12*4 Sliding Blocks
Y-axis (saddle) 2,100mm (82.7") 2,600mm (102.4")
2 linear guides
2*2 Sliding Blocks		 2 linear guides
2*2 Sliding Blocks
Z-axis (spindle head) 1,000mm (39.4")/
(opt800mm(31.5"))		 1,000mm (39.4")/
(opt800mm(31.5"))
2 Box Guide Ways 2 Box Guide Ways
From the spindle nose to the worktable surface 210-1,200mm (8.3"-47.2")/
(opt 210-1,000mm(8.3"-39.4"))		 210-1,200mm (8.3"-47.2")/
(opt 210-1,000mm(8.3"-39.4"))
Distance between two pillars 2360mm (92.9") 2860mm (112.6")
workbench
Workbench size 8000mm*2000mm
(315.1"*59.1")		 8000mm*2500mm
(315.1"*98.4")
T-shaped trench 9x22mmx200mm 11x22mmx200mm
work surface to ground 870mm (34.3") 890mm(35")
Maximum load of the workbench 20,000 kgs (44,000 lbs) 20,000 kgs (44,000 lbs)
spindle head
Spindle skew (BT/CAT) BT50/CAT50 BT50/CAT50
Spindle speed RPM (BT50) 6000rpm(P)(opt.8000/10000rpm)
speed
Rapid traverse speeds of each axis (X/Y/Z) 10/10/10M/Min.
(393/393/393IPM)		 10/10/10M/Min.
(393/393/393IPM)
Approach feed rates for each axis (X/Y/Z) 1~8000mm/min 1~8000mm/min
motor
BT50 spindle motor (continuous/30 minutes) 22/26kw (30/35HP) 22/26kw (30/35HP)
AC servo motors of each axis X,Y,Z: 7KW-30NM X,Y,Z: 7KW-30NM
Cutting cooling pump 1250W 1250W
slide rail lubrication pump 60W 60W
Spindle cooling device 1220W 1220W
Automatic tool changer
Tool arm type tool magazine capacity 32 TOOL / (OPT. 40/60 TOOL)
Maximum permissible diameter of the cutting tool (adjacent) BT50-Ø125MM
Maximum tool length 300mm (11.74")
Maximum permissible weight of the knife 20kg (44lbs)
Tool change time (T to T / C to C) 8/12 SEC.
accuracy
Positioning accuracy ±0.02 mm ±0.02 mm
Repeatability ±0.02 mm ±0.02 mm
General Information
air pressure 6 kg / cm² 6 kg / cm²
Electricity demand 50KVA, 220V, 3 PHASE, 50/60HZ
Mechanical weight 53,000 kgs (116,600 lbs) 54,500 kgs (119,900 lbs)
Floor area (Depth × Width × Height) 17800*6960*3900mm 17800*7505*3900mm
controller Fanuc 0iMF/31iMB
*Our company is constantly conducting research and improvement work, and therefore reserves the right to change the design specifications, dimensions, and machinery at any time without prior notice.

Standard Annex

  1. Dual hydraulic cylinder counterweight system
  2. Mobile hand arterial wave generator
  3. Central automatic lubrication system
  4. Fully enclosed protective cover (excluding top surface)
  5. 32-blade floor-standing and automatic tool changer system
  6. Cutting fluid cooling system
  7. Chassis double-row screw
  8. RS-232 interface
  9. Chain-type iron chip conveyor and chip removal vehicle
  10. Cleaning with water guns and air guns
  11. Rigid tapping
  12. Toolbox (including a set of adjustment tools)
  13. Foot-operated automatic clamp release knife
  14. One set of maintenance and operation manuals

Special Attachment

  1. Optical ruler fully closed-loop feedback system
  2. Automatic tool length measurement
  3. Water outlet at the spindle center
  4. Half-face protective cover
  5. 4,000/8,000 RPM spindle
  6. Fully enclosed protective shield
  7. 40/60 tool magazine
  8. oil-water separator
  9. Oil circuit knife handle
  10. Z-axis travel 1200mm
  11. Five-sided head (3500rpm)
Contact Us

If you have any suggestions or advice, please leave your valuable information and we will reply to you as soon as possible.

Ask A Member
AGMACHINE TECHNO CO., LTD.
Inquire About Products
Gantry Vertical Machining Center BDO-3223
※Company
※Contact Person
※Contact Number
※E-mail
※Inquiry Content