Gantry Machining Center SP-1703

Product Features

All-gear spindle head (optimized configuration) The spindle center is close to the Z-axis slideway, which greatly reduces the torque for thermal displacement or side machining, thus preventing bending deformation problems. The spindle is driven by a powerful motor, which is suitable for various complex machining needs and provides high machining accuracy.
	Two-speed gearbox The spindle operates via a gearbox and can be switched between high and low speeds. The low-speed gear provides high torque output, making it suitable for heavy cutting operations. The high-speed setting is suitable for light cutting, resulting in a refined machined surface. All gears in the gearbox are carburized and precision ground, resulting in low noise operation.
Spindle oil cooler The spindle oil cooler can be adjusted as needed to properly control spindle temperature changes. This cooler provides excellent cooling for the gears, ensuring stable spindle accuracy and extending the service life of the spindle and gearbox.
	Nitrogen cylinder balancing system The nitrogen cylinder balancing system is equipped with an accumulator, eliminating the need for an additional power unit. This balancing system ensures the stability of spindle movement, thereby improving machining accuracy.

Processing characteristics

*The above cutting test data is for reference only, and the test data may vary depending on the customer's cutting conditions.

*The above cutting test data is for reference only, and the test data may vary depending on the customer's cutting conditions.

*The above cutting test data is for reference only, and the test data may vary depending on the customer's cutting conditions.

Specifications and dimensions

*Note:
- Due to technical research needs, we reserve the right to modify the machine tool specifications at any time without prior notice.
- Custom-made machine tools are available.

Standard equipment

• FANUC controller
• High-pressure automatic lubrication system
• Semi-enclosed splash guard
• Spiral chip conveyor (both sides)
• Tracked chip conveyor and chip collector
• Chip cooling pump and water tank
• Spindle oil cooler
• Nitrogen counterweight system
• Z-axis hydraulic balance system
• pneumatic device
• Air blowing chip removal device
• Quartz work light
• Automatic power-off device
• Program End and Warning Light
• RS-232 interface
• Basic screws and leveling bolts
• Adjustment tools
• Operation and Maintenance Manual
• Controller Operation Manual and Electrical Diagram
• Mechanical Precision Inspection Checklist

Select equipment

• Auxiliary tool table
• NC rotary table
• Tool setter
• Computer scanning and contouring system
• Optical ruler feedback
• 90° side milling head
• Universal milling head
• 45° milling head
• Oil-water separator water tank
• Central outlet