- Home
- Products
- CNC Machine Parts
- DETRON MACHINE CO., LTD.
- DDM series direct-drive high-speed motors
DETRON MACHINE CO., LTD.
DDM series direct-drive high-speed motors
Share:
DTFS170P
Specification
| model | Unit | DTFS170P | ||
|---|---|---|---|---|
| Rotary table diameter | mm | Ø170 | ||
| Center hole diameter | mm | Ø40H7 | ||
| Workbench height (horizontal position) | mm | 280 | ||
| Center height (vertical position) | mm | 280 | ||
| Workbench T-slot width | mm | 12H7 | ||
| Guide block width | mm | 18 | ||
| Drive method/drive pressure | MPa | Air pressure 0.6 ~ 0.7 | ||
| Maximum rotational speed of the disc | min-1 | R | T | |
| 250 | 100 | |||
| Allowable load capacity | In horizontal | kg | 30 | |
| On an incline (0-90°) | kg | 30 | ||
| Allowable workpiece imbalance | WxL | Nm | 30 | |
| Permissible cutting force (when the rotary table is clamped) | F | N | 12700 | |
| FXL | Nm | 230 | ||
| FXL | Nm | 400 | ||
| Permissible load inertia capacity (W.D2/8) | kg.m2 | 0.12 | ||
| Minimum setting unit | deg. | 0.001 | ||
| Indexing accuracy | sec. | 20" | 30" | |
| Repeatability | sec. | 4" | 4" | |
| Tilting angle | deg. | +30 ~ -120 | ||
| Net weight (including motor) | kg | 215 | ||
| Cooling method | Self-cooling | |||
DV-255PII
Specification
| model | Unit | DV-255PII | |
|---|---|---|---|
| Rotary table diameter | mm | Standard: No dial / Optional: Ø255 | |
| Center hole diameter | mm | Ø65g6 / Optional: Ø50H7 | |
| Center through hole diameter | mm | Ø40 | |
| Center height (vertical position) | mm | 160 | |
| Worktable T-slot width (optional tray surface) | mm | 12H7 | |
| Guide block width | mm | 18 | |
| Drive method/drive pressure | MPa | Air pressure 0.5~0.7 | |
| Locking torque | Nm | 400 | |
| Reduction ratio | direct pass | ||
| Maximum rotational speed of the disc | min-1 | 250 | |
| Permissible load inertia capacity (W.D2/8) | kg.m2 | 0.61 | |
| Minimum setting unit | deg. | 0.001 | |
| Indexing accuracy | sec. | 20 | |
| Repeatability | sec. | 4 | |
| Net weight (including motor) | kg | 70 | |
| Allowable load capacity | Vertical | kg | 75 |
| Horizontal | kg | - | |
| Use tailstock | kg | 150 | |
| Permissible cutting force (when the rotary table is clamped) | F | N | 14000 |
| FXL | Nm | 1020 | |
| FXL | Nm | 400 | |
| Continuous cutting torque | Nm | 70 | |
2. Grading accuracy will vary depending on the optical scale selected by the customer.
DTFAI-650H
Specification
| model | Unit | DTFAI-650H | ||
|---|---|---|---|---|
| Rotary table diameter | mm | Ø650 | ||
| Center hole diameter | mm | Ø70H7 | ||
| Workbench height (horizontal position) | mm | 250 | ||
| Workbench T-slot width | mm | 18H7 | ||
| Guide block width | mm | - | ||
| Drive method/drive pressure | MPa | Hydraulic pressure 4 | ||
| Maximum rotational speed of the disc | R | T | ||
| min-1 | 100 | 50 | ||
| Allowable load capacity | In horizontal | kg | 300 | |
| On an incline (0-90°) | kg | 300 | ||
| Allowable workpiece imbalance | WxL | Nm | 300 | |
| Permissible cutting force (when the rotary table is clamped) | F | N | 40000 | |
| FXL | Nm | 2500 | ||
| FXL | Nm | 4500 | ||
| Permissible load inertia capacity (W.D2/8) | kg.m2 | 9.4 | ||
| Minimum setting unit | deg. | 0.001 | ||
| Indexing accuracy | sec. | 10" | 20" | |
| Repeatability | sec. | 4" | 4" | |
| Tilting angle | deg. | +110 ~ -110 | ||
| Net weight (including motor) | kg | 1450 | ||
| Cooling method | Oil-cooled (shared cooling system with the machine tool) | |||
Contact Us
If you have any suggestions or advice, please leave your valuable information and we will reply to you as soon as possible.