繁體中文 English
SHOU ZUAN PRECISION MACHINERY CO., LTD.

Vertical machining center MT-850VS

主軸錐度：BT40

三軸行程：X810 / Y520 / Z520

Product Features

  • The one-piece molded ATC support interface provides greater stability during tool changes.
  • The machine's high rigidity and high precision structure make it suitable for heavy cutting and precision machining.
  • A well-designed drainage and oil flushing system.

workpiece

spiral

Needle column

lampshade


Product Application

Mechanical Specifications

model MT-850 V MT-850 VS
workbench Workbench size mm 900 x 500 900 x 500
T-slot (width x groove width x spacing) mm x T 18 x 5 x 90 18 x 5 x 90
Maximum load kgs 500 500
journey Three-axis travel mm 810 x 520 x 520 810 x 520 x 520
Distance from spindle end face to worktable surface mm 90-610 90-610
Distance from spindle center to slide surface mm 580 580
X, Y, Z rails mm 35 / 35 / 35 35 / 35 / 35
X, Y, Z ball screws   40 / 40 / 40 40 / 40 / 40
spindle Spindle type   belt type direct connection
spindle taper   BT40 BT40
spindle diameter mm ∅70 ∅70
Spindle speed rpm 10000 10000
fast movement Three-axis slide   Roller linear guide Roller linear guide
Three-axis cutting feed rate m / min 10 / 10 / 10 10 / 10 / 10
Three-axis rapid traverse rate m / min 36/ 36 / 36 36 / 36 / 36
Tool magazine Tool changing method   Blade Arm Blade Arm
Maximum tool diameter adjacent tool / empty adjacent tool mm ∅75 / ∅150 ∅75 / ∅150
Maximum tool length mm 300 300
Maximum weight of the knife kgs 7 7
Knife Handle Specifications   BT40 BT40
Tool capacity (arm type) T twenty four twenty four
drive motor Spindle drive motor (continuous/30 minutes) kw 7.5 / 11 7.5 / 11
X, Y, Z drive motors kw 2.0 / 2.0 / 3.0 (Mitsubishi)
3.0 / 3.0 / 4.0 (FANUC)		 2.0 / 2.0 / 3.0 (Mitsubishi)
3.0 / 3.0 / 4.0 (FANUC)
Cutting water motor kw 0.75 0.75
Tool magazine motor w 350 350
Electrical box air conditioner cooling unit w 500 500
Spindle cooling device w 600 600
Chip flushing motor w 2580 2580
Standard Specifications Site area (length x width) mm 2200 x 2050 2200 x 2050
Cover   Fully enclosed dome Fully enclosed dome
Water tank capacity L 250 250
Machine weight kgs 5300 5300
Total power consumption kw 20 20
* Our company is constantly researching and improving our products, and we absolutely reserve the right to change the design, specifications, dimensions, and mechanical structure at any time.

Accessories

Standard accessories

  • Fully enclosed dome
  • Three-axis telescopic cover
  • Disc-type oil-water separator
  • Water gun and air gun device
  • High-pressure chip removal device
  • Toolbox and tools
  • LED work lights
  • 24-arm tool magazine


  • Automatic lubrication system
  • Electrical box heat exchanger
  • Tri-color work warning light
  • Mitsubishi M80 System Controller
  • Spiral chip conveyor with chip collection cart
  • Automatic tool length measurement
  • Spindle cooling device
  • Main shaft ring spray

Special Attachment

  • FANUC series control systems
  • SIEMENS series control systems
  • Direct-drive spindle 12,000 / 15,000 RPM
  • Built-in spindle 20,000 / 24,000 RPM
  • Spindle center water outlet device
  • Electrical box air conditioner refrigeration unit
  • transformer
  • voltage regulator
  • Tracked chip conveyor


  • CE Specification
  • Three-axis optical scale
  • Tool breakage detection
  • Oil mist recovery machine
  • Variable frequency tool magazine
  • X, Y axis hollow oil cooler
  • Fourth axis indexing plate
  • Five-axis rotary table
Contact Us

If you have any suggestions or advice, please leave your valuable information and we will reply to you as soon as possible.

Ask A Member
SHOU ZUAN PRECISION MACHINERY CO., LTD.
Inquire About Products
Vertical machining center MT-850VS
※Company
※Contact Person
※Contact Number
※E-mail
※Inquiry Content