繁體中文 English
SHOU ZUAN PRECISION MACHINERY CO., LTD.

Vertical machining center MT-1370VS

主軸錐度：BT40

三軸行程：X1300 / Y700 / Z700

Product Features

  • The machine head uses pneumatic counterweight to reduce the load on the Z-axis motor and stabilize machining accuracy.
  • X-axis six-slider design.
  • The Y-axis slideway adopts a roller-type four-line rail design, which not only strengthens the machine structure but also maintains stable machining accuracy during high-speed movement.
  • Y-axis double spiral front chip removal device (optional).

workpiece

spiral

Needle column

lampshade


Product Application

Mechanical Specifications

model MT-1370 V MT-1370 VS
workbench Workbench size mm 1400 x 600 1400 x 600
T-slot (width x groove width x spacing) mm x T 18 x 5 x 110 18 x 5 x 110
Maximum load kgs 800 800
journey Three-axis travel mm 1300 x 700 x 700 1300 x 700 x 700
Distance from spindle end face to worktable surface mm 105-805 105-805
Distance from spindle center to slide surface mm 670 690
X, Y, Z rails mm 35/35, 45/45 35/35, 45/45
X, Y, Z ball screws   40 / 40 / 40 40 / 40 / 40
spindle Spindle type   belt type direct connection
spindle taper   BT40 BT40
spindle diameter mm ∅60 ∅70
Spindle speed rpm 10000 10000
fast movement Three-axis slide   Roller linear guide Roller linear guide
Triaxial cutting feed rate m/min 10 / 10 / 10 10 / 10 / 10
Three-axis rapid traverse rate m/min 36 / 36 / 36 30 / 30 / 30
Tool magazine Tool changing method   Blade Arm Blade Arm
Maximum tool diameter adjacent tool / empty adjacent tool mm ∅75 / ∅150 ∅75 / ∅150
Maximum tool length mm 300 300
Maximum weight of the knife kgs 7 7
Knife Handle Specifications   BT40 BT40
Tool capacity (arm type) T twenty four twenty four
drive motor Spindle drive motor (continuous/30 minutes) kw 11/15 11/15
X, Y, Z drive motors kw 3.0 / 3.0 / 4.5 (Mitsubishi)
3.0 / 3.0 / 4.0 (FANUC)		 3.0 / 3.0 / 4.5 (Mitsubishi)
3.0 / 3.0 / 4.0 (FANUC)
Cutting water motor kw 0.75 0.75
Tool magazine motor w 350 350
Electrical box air conditioner cooling unit w 500 500
Spindle cooling device w 600 600
Chip flushing motor w 2580 2580
Standard Specifications Site area (length x width) mm 3300 x 2250 3300 x 2250
Cover   Fully enclosed dome Fully enclosed dome
Water tank capacity L 350 350
Machine weight kgs 8000 8000
Total power consumption kw 30 30
* Our company is constantly researching and improving our products, and we absolutely reserve the right to change the design, specifications, dimensions, and mechanical structure at any time.

Accessories

Standard accessories

  • Fully enclosed dome
  • Three-axis telescopic cover
  • Disc-type oil-water separator
  • Water gun and air gun device
  • High-pressure chip removal device
  • Toolbox and tools
  • LED work lights
  • 24-arm tool magazine


  • Automatic lubrication system
  • Electrical box heat exchanger
  • Tri-color work warning light
  • Mitsubishi M80 System Controller
  • Spiral chip conveyor with chip collection cart
  • Automatic tool length measurement
  • Spindle cooling device
  • Main shaft ring spray

Special Attachment

  • FANUC series control systems
  • SIEMENS series control systems
  • Direct-drive spindle 12,000 / 15,000 RPM
  • Built-in spindle 20,000 / 24,000 RPM
  • Spindle center water outlet device
  • Electrical box air conditioner refrigeration unit
  • transformer
  • voltage regulator
  • Tracked chip conveyor


  • CE Specification
  • Three-axis optical scale
  • Tool breakage detection
  • Oil mist recovery machine
  • Variable frequency tool magazine
  • X, Y axis hollow oil cooler
  • Fourth axis indexing plate
  • Five-axis rotary table
Contact Us

If you have any suggestions or advice, please leave your valuable information and we will reply to you as soon as possible.

Ask A Member
SHOU ZUAN PRECISION MACHINERY CO., LTD.
Inquire About Products
Vertical machining center MT-1370VS
※Company
※Contact Person
※Contact Number
※E-mail
※Inquiry Content