繁體中文 English
SHOU ZUAN PRECISION MACHINERY CO., LTD.

MT-57E22VD gantry machining center

主軸錐度：BBT40

行程：X3100 / Y1450 / Z700

Product Features

Mechanical Specifications

model MT-57E22 VD
workbench Workbench size mm 3000 x 1450
T-slot (width x groove width x spacing) mm x T 20 x 180 x 8
Maximum load kgs 10000
journey Three-axis travel mm 3100 x 1450 x 700
Distance from spindle end face to worktable surface mm 134-834
Distance from spindle center to the leading edge of the base mm --
Three-axis rail mm 55 x 4 / 45 x 2, 35 x 1 / 45 x 2
Three-axis ball screw   63 / 45 / 40 (Pitch 12)
spindle Spindle type   direct connection
spindle taper   BBT40
spindle diameter mm ∅70
Spindle speed rpm 15000
fast movement Three-axis slide   Roller linear guide
Triaxial cutting feed rate m/min 10 / 10 / 10
Three-axis rapid traverse rate m/min 20 / 20 / 20
Tool magazine Tool changing method   Blade Arm
Maximum tool diameter adjacent tool / empty adjacent tool mm ∅75 / ∅150
Maximum tool length mm 300
Maximum weight of the knife kgs 7
Knife Handle Specifications   CAT40
Tool capacity (arm type) T twenty four
drive motor spindle motor power kw 15
Three-axis servo motor kw 9.0 / 7.0 / 7.0
Cutting water motor kw 0.75
Tool magazine motor w 1650
Electrical box air conditioner cooling unit w 500
Spindle cooling device w 1970
Chip flushing motor w 1290
Standard Specifications Area of ​​the site (length x width) mm 7600 x 4300
Water tank capacity L 500
Machine weight kgs 24000
Total power consumption KVA 50
Required air pressure kg/cm2 7 and above
* Our company is constantly researching and improving our products, and we absolutely reserve the right to change the design, specifications, dimensions, and mechanical structure at any time.

Accessories

Standard accessories

  • Fully enclosed dome
  • Disc-type oil-water separator
  • Water gun and air gun device
  • High-pressure chip removal device
  • Toolbox and tools
  • LED work lights
  • Centrally equipped with automatic lubrication system


  • Electrical box heat exchanger
  • Tri-color work warning light
  • Automatic tool length measurement
  • Spindle oil cooling unit
  • Main shaft ring spray
  • Spiral chip conveyor with chip collection cart

Special Attachment

  • BBT #40 Direct connection 12000 RPM (V Series)
  • BBT #50 Direct connection 6000-8000 RPM (V Series)
  • The HSKA63 contains 24,000 RPM (VS series).
  • Long nose tip main axis
  • Tracked chip conveyor
  • Spindle center water outlet device
  • Three-axis optical scale


  • CE Specification
  • Tool breakage detection
  • Oil mist recovery device
  • Variable frequency tool magazine
  • X, Y axis hollow oil cooler
  • Fourth axis indexing plate
  • Five-axis rotary table
Contact Us

If you have any suggestions or advice, please leave your valuable information and we will reply to you as soon as possible.

Ask A Member
SHOU ZUAN PRECISION MACHINERY CO., LTD.
Inquire About Products
MT-57E22VD gantry machining center
※Company
※Contact Person
※Contact Number
※E-mail
※Inquiry Content